Core Features
1. Elastic buffering design
Nylon elastic sleeve provides excellent vibration damping performance

Capable of absorbing start-up shock and operational vibration

Allow radial deviation compensation of 0.2-0.5mm

2. Structural advantages
Split design, easy to install

Maintenance free, no lubrication required

Lightweight (compared to metal couplings)

Good electrical insulation performance (some models)

3. Performance parameters
Typical parameter range
Torque range 5-8000 Nm
Maximum speed 4000-8000 rpm
Shaft diameter range 10-160 mm
Temperature range -40 ° C to+100 ° C
Typical applications
Connection between motor and pump

Compressor transmission system

Conveyor belt drive device

Food machinery (compliant with hygiene requirements)

Packaging equipment (low noise requirement)

Key selection points
torque calculation

Peak torque needs to be considered (such as during motor start-up)

Axis hole matching

Provide multiple options such as cylindrical holes, conical holes, keyways, etc

Environmental adaptability

Corrosion resistant type should be selected for humid environments

Confirm the temperature resistance level of nylon in high temperature environments

Installation precautions
Do not hammer the nylon sleeve during installation

Ensure that the alignment deviation of the two axes is within the allowable range

Tighten the bolts according to the specified torque

Maintenance suggestions
Regularly check the wear of nylon sleeves

If cracks or permanent deformation are found, they should be replaced immediately

Avoid direct sunlight during storage (to prevent nylon aging)